Pan-patch Drain Pan Sealant

Pan-Patch is an epoxy drain pan repair that permanently seals drain pan leaks while preventing further rust and corrosion. The formula is based around a ceramic filled novolac 2 part epoxy system that has high cross linked density, but contains no solvents or VOC’s. This robust coating can withstand substances ranging from Sulfuric acid (75%), to diesel fuel, to ethylene glycol, all the way down to brine water. Once cured (4-6 hours) Pan-Patch has a smooth, light gray composition. | Some of Pan-Patch’s advantages are minimal surface preparation, the ability to bond to wet or damp substrates, as well as being able to cure under water. Pan-Patch’s self-leveling formula allows for even coverage and creates a strong, permanent impact resistant bond with the surface, be it wood, metal, or concrete. | Other uses include sump and cooling tower repair. | Coverage: One bag covers 8 square feet at 10 mils | Pot Life: 40° F: 9 hours | 75° F: 1hour | 95° F: 40 Minutes | Cure Time: 75 °F: 4-6 hours | Flash Point: 250° F | Recommended Thickness: 2 coats of 8-12 mils each | Volatile Organic Compounds (VOC’s): 0 grams/liter | Pull-off Adhesion Test ASTM D-4541: Mid adhesion 2750 psi | Easy to use, Pre-measured two part epoxy in one bag, simply remove divider and mix the two parts together